25grms tube, neoprene rubber coating for general purpose use up to 80degC
A layer of N-1 is applied directly from the tube or with a brush over the area to be coated. Curing time is about half a day in room temperature, but it depends on conditions such as the specimen material, temperature, and so on. If the coating layer is too thin, apply another layer to make an adequate thickness.
|Materials||Chloroprene rubber based solvent thinned|
|Curing Conditions||Air-drying, a half day in room temperature|
|Purpose||Moisture- and water-proofing coating for laboratory and less severe field requirements where mechanical protection is not needed.|