25grms tube, special rubber for cryogenic use down to -269degC
A layer of K-1 is applied directly from the tube or with a brush over the area to be coated. Curing time is about half a day in room temperature, but it depends on conditions such as the specimen material, temperature, and so on. If the coating layer is too thin, apply another layer to make an adequate thickness.
|Materials||Special rubber based solvent thinned|
|Curing Conditions||Air-drying, a half day in room temperature|
|Purpose||Moisture-proofing coating from cryogenic to room temperature for laboratory requrements. Does not provide a high degree of mechanical protection.|